Duct Leakage Testing in Viera

Professional rough-in and final duct leakage testing for builders, HVAC contractors, and construction teams to verify duct tightness, identify problems, and support Florida energy-code compliance.

Next Day Scheduling Available | Same Day Digital Reporting | Compliant with Florida Energy Codes

 
Duct leakage test being performed by Stellar Building Performance on a Florida home

RESNET Certified Inspector | Builder Focused Turnaround | Immediate Electronic Reports

Stellar Building Performance is proudly based in Brevard County, a short drive from every Viera neighborhood. Viera is unincorporated, so permitting and inspections run through Brevard County rather than a city department, and we schedule duct testing to line up with the county inspection calendar.

What Is a Duct Leakage Test?

Builders working in Viera are working in the master-planned community carrying most of the new-construction volume in central Brevard. Between production phases across the Viera villages, the same plan comes up again and again — and so does the same duct layout.

A duct leakage test measures how much air escapes the duct system instead of reaching the rooms it was sized for. Registers are sealed and a calibrated duct blaster pressurizes the system to 25 Pascals, reporting the result as CFM25 per 100 square feet of conditioned floor area.

We test for Viera builders and developers and send the report the same day, documented against the Florida Energy Conservation Code for Brevard County Planning and Development.

Request Duct Leakage Testing

we respond quickly for viera duct leakage testing. no waiting days for scheduling and reports.

Florida Energy Code Duct Leakage Requirements

A duct test is required here whenever any part of the duct system or the air handler sits outside the conditioned space. Total leakage must be no more than 4 CFM25 per 100 square feet of conditioned floor area, or 3 CFM25 per 100 square feet at rough-in where the air handler is not yet installed. Where every duct run and the air handler are inside the thermal envelope, the code does not require a test at all.

Viera is unincorporated, so Brevard County Planning and Development reviews plans, issues permits and performs inspections, with scheduling through the county BASS system rather than a city portal. Across a 14,500-acre master plan running from production single-family to active-adult and custom homes, we document results to match what the county reviewer expects.

Why is Duct Leakage Testing Beneficial?

Across production phases across the Viera villages, one detail missed in framing shows up in every unit that follows. Testing in Viera is how it gets caught once instead of twenty times.
Ducts losing air outside the conditioned space can cause:

  • Higher Energy and Utility Costs
  • Uncomfortable indoor temperatures
  • Humidity and condensation issues
  • Reduced HVAC performance

For Viera projects the test does two jobs at once: it satisfies Brevard County Planning and Development and it tells the builder whether the assembly actually performed the way it was drawn.

How We Keep Our Services Simple and Easy

We want completing your Duct Leakage Testing in Viera to be as easy as possible.

1.

Schedule your test

You tell us the Viera address and when the home will be ready. Viera runs on production timing, so we hold slots against the phase schedule instead of booking house by house.

2.

onsite testing

Registers are sealed and the duct blaster is connected to the system, which is then brought up to test pressure. We work around whoever else is still on site in Viera, so nobody has to clear out.

3.

Diagnostics and Measurements

We measure total duct leakage in CFM25 per 100 square feet and compare it against the limit for the test stage. We note the problem areas while we are still standing in the house.

4.

Report delivered same day via email

Everyone on the Viera project team gets the signed report the same day, not on the next visit.

5.

Ready for Final Inspection approval

With the report on file, Brevard County Planning and Development can close out the permit and issue the certificate of occupancy.

Contact Us for Fast & Convenient Duct Leakage Testing in Viera

Why Builders Choose Stellar Building Performance

Other Inspectors

  • Scheduling up to a week in advance
  • No guaranteed turnaround
  • Unconfirmed scheduling requests
  • Fails tests without reasoning
  • Reports left on jobsite; often lost, forgotten, and require additional trips to jobsite

You’re just another sale

Stellar Building Performance

  • Same and Next Day Available
  • Coordinated around your stage of construction
  • Clear communication and inspection confirmation
  • Documented deficiencies and tips if structure needs improvement
  • Reports delivered instantly via email to all involved team members

No missed appointments or reschedules.
Responsive scheduling for Viera projects.

We’re on the same team

Recent Duct Leakage Tests

Checking in from the field! See some highlights of our recent Duct Leakage Test site visits!

Frequently asked questions about Duct Leakage Testing

How long does a Duct Leakage Test take in Viera?

Budget half an hour to an hour on site in Viera, depending on the size of the house. Nothing is drilled, cut or removed.

What kind of buildings in Viera need Duct Leakage Testing?

Simple rule of thumb: if it’s a conditioned space intended for people, it will require duct leakage testing.
By code definition, any dwelling unit permitted for residential use requires duct leakage testing in Viera. This includes:

Common Structures Like:

  • Single Family Homes
  • Duplexes
  • Townhomes
  • Apartments

Additional Structures Like:

  • Guest Houses
  • Pool Houses
  • Additions
  • Newly conditioned garages
  • Workshops
  • Mother-in-law suites
What kind of duct systems in Viera need to be tested?

In Viera, duct leakage testing is required for new residential buildings where any part of the duct system or the air handler sits outside the conditioned space. That covers most homes with ducts in an attic, a garage, a crawlspace, or a soffit chase. If every duct run and the air handler are inside the thermal envelope, the code exempts the system from testing.

Can a missing Duct Leakage Test stop me from getting my CO in Viera?

It can. Brevard County Planning and Development needs the documented result in the file before it closes the permit, so a missing report in Viera is a stalled CO. We schedule so that does not happen.

Do we test at rough-in or after construction in Viera?

Either one is allowed. A rough-in test is run before the drywall closes the system up, which is the better moment to catch a problem because the ducts are still reachable. A postconstruction test is run near the end, once the air handler is in and the home is approaching final inspection. The limit is 4 CFM25 per 100 square feet in both cases, except at rough-in without the air handler installed, where it tightens to 3.

Do we need to stop work and get everyone out of the building for testing?

In most cases, no. Other trades can keep working in Viera while we test — we only need the openings closed and the house in its final configuration.

Who issues building permits in Viera?

Viera is unincorporated, so permitting and inspections run through Brevard County Planning and Development rather than a city department, with permits and inspection scheduling handled in the county’s BASS system.
We schedule duct testing to line up with the county inspection calendar so closeout is not waiting on us.

Is testing different for the single-story active adult homes in Viera?

The requirement is identical, but the envelope behaves differently. Compact single-story homes on slab have a smaller conditioned volume, so a given amount of leakage produces a higher ACH50 than it would in a larger house.
Air sealing at top plates, recessed lighting and penetrations matters more on a smaller home, not less.

Duct Leakage Testing Code Reference

Duct Leakage Test Florida Requirements Explained

Duct leakage testing is required in Viera under R403.3.3 of the 2023 Florida Building Code, Energy Conservation, Eighth Edition, which calls for ducts to be pressure tested at 25 Pascals either at rough-in or after construction.

The limits live in R403.3.4. Total leakage must be no more than 4 CFM25 per 100 square feet of conditioned floor area on a postconstruction test, and the same 4 CFM25 on a rough-in test where the air handler is installed. If the air handler is not in place at rough-in, the limit tightens to 3 CFM25 per 100 square feet.

There is a real exception: no duct test is required where the ducts and air handlers are located entirely within the building thermal envelope. Homes on the performance path under R405 are handled differently again, and are tested against the duct leakage rate assumed in the energy calculation.

We keep the full code language, including the complete text of R403.3.3, R403.3.4 and the R405 provisions, on our main duct leakage page: read the full Florida duct leakage code references.

questions? give us a call, this is our specialty!

Need Duct Leakage Testing in Viera to Pass Final Inspection?

Similar Services

Most Viera projects need more than one of these. We do all of them, on the same schedule and in the same report chain.

Blower Door Testing

Verify the building envelope meets the 7 ACH50 air leakage limit using a calibrated duct leakage, required for new construction inspections. We provide this service across the Viera area!

Energy Code Calculations

Energy performance calculations required for Florida residential building permits and code compliance documentation.

Helping Viera Builders Stay on Schedule

Fast Scheduling

We know how Viera books inspections, and we test to fit that rather than fight it.

accurate results

A RESNET certified inspector and calibrated gear — results Brevard County Planning and Development will accept without a second visit.

immediate reports

Same-day digital reporting to the whole Viera project team, with deficiencies named if there are any.